Hardware

There are two formats available both handled by an autosampler: 50 x 1.5 ml glass vials where you can add an insert for small volume or two 96 well plates.

It takes from app. 30 min. depending on the assay type.

There are three independent temperature control: The temperature of the capillary compartment, as well as the two sample trays. The sample trays can be independently set from 5 up to 55 degrees +/- 1 degree. The capillary compartment can be set between 10° Celsius - 55° Celsius. Cooling to 5° Celsius assumes a room temperature at 22° Celsius or below.

Fida 1 is a very robust system which does not require calibration or day-to-day maintenance in addition to standard laboratory tidiness or cleaning. To ensure consistently high performance, we do provide service agreements with preventive maintenance etc. Ask your regional representative for an offer. If you need any technical help contact techsupport@fidabio.com

Yes, there is a method for dehumidifying. Please contact techsupport@fidabio.com for a consultation

Fida setup footprint with 1 detector: 120 cm x 70 cm Fida setup footprint with 2 detectors: 140 cm x 70 cm Note, that you will also need space for a PC.

Autosampler temperature control: 5-55°C (41°C-131°F) Capillary chamber temperature control 15°-55°C (59°-131°F)

Guide to dynamic coating of a capillary. Press to access.